Moose 3D Scanner Vertical Mount (parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to mount a moose 3d scanner vertically on a stand instead of horizontally. Parametric design to adapt to inserts.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 51
- Makes
- 1
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fusion360 file is available but only for my changes since it is based of the stl (v2) of the base model. It can be useful for further remixes however.
You can adjust the feet tolerances and the mount insert diameters via the fusion360 parameters.
The only additional hardware/non printable part you need is a standard 8mm “1/4-20 Threaded Heat Set Insert” to connect this model with most common tripods and other mounting accessories. (You also have to use the 1/4-20 compatible screw that came with your scanner to attach the scanner to the model)
Additionally to being parametric, the mounting hole for the heat insert was changed to allow for easy alignment of the insert before the heat insertion.
Printing information:
- Print the foot model x3 in tpu, the feet should press fit but you can always use a bit of glue if needed
- Use tree supports for the main_body
Please refer to the original model for additional information. All credits go to the original author.