Motorcycle Clutch Service Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handy helper to maintain the motorcycle clutch. Works for Hayabusa, GSX-R, ZZR and many more.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 69
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a clutch service tool, inspired by www.agmotorsports.net. It is more portable if you want to use it on the racetrack an easy to store when not in use. The one agmotorsports made, is super handy when you use it often and keep it on the workbench. But it is not so easy to pack it in a trunk and have it in your toolbox. So I made this one, which is simple to transport and store somewhere.
The Inlays can be taken out to wipe out the box, after some oil drained from the plates.
You will need 6 screws 3mm x 30mm (or you remix the Box, the fusion files are includet)
There are no supports needed. The inlays need to be printed with the face side on the bed (up side down). For the maximum strengs print the latch standing on the side