Bambu Lab AMS Desiccant Containers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desiccant Containers for Bmabu Lab AMS. With or Without Hydrometer. With sliding door/latch and handle
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 135
- Makes
- 1
- Views
- 901
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Here is my design for desiccant containers that fit the Bambu Lab AMS. I started with looking at how other folks approached this issue. In the end I decided to make my own version. This design requires zero supports and isn’t printed on a odd angle to capture all features. Instead I decided to make two shell halves that can be printed flat. All it takes is a dot of Super Glue (Cyanoacrylate Adhesive) at each peg hole to assemble. I also incorporated a sliding top cover/door with snap latches for easy opening/closer. This door also has a handle making easier to remove from the AMS. I also maximized the envelope size to still fit with more volume to hold maximum desiccant.
Like other designs I have two versions. One with opening to accept a low cost hydrometer (see below for Amazon link). The other version without the opening to maximize how much desiccant can be loaded. One note: filament spools have to be removed from the AMS to allow access to the desiccant containers.
https://www.amazon.com/dp/B08M3P74N3?ref=ppx_yo2ov_dt_b_fed_asin_title