Bambu Lab AMS Desiccant Containers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desiccant Containers for Bmabu Lab AMS. With or Without Hydrometer. With sliding door/latch and handle
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 901
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is my design for desiccant containers that fit the Bambu Lab AMS. I started with looking at how other folks approached this issue. In the end I decided to make my own version. This design requires zero supports and isn’t printed on a odd angle to capture all features. Instead I decided to make two shell halves that can be printed flat. All it takes is a dot of Super Glue (Cyanoacrylate Adhesive) at each peg hole to assemble. I also incorporated a sliding top cover/door with snap latches for easy opening/closer. This door also has a handle making easier to remove from the AMS. I also maximized the envelope size to still fit with more volume to hold maximum desiccant.
Like other designs I have two versions. One with opening to accept a low cost hydrometer (see below for Amazon link). The other version without the opening to maximize how much desiccant can be loaded. One note: filament spools have to be removed from the AMS to allow access to the desiccant containers.
https://www.amazon.com/dp/B08M3P74N3?ref=ppx_yo2ov_dt_b_fed_asin_title