Anti-roll foot / mini stand for Pinecil soldering iron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small but very effective anti-roll foot and mini stand for the Pinecil.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
- 11/2024: Added a “wide” version with 50% wider base. This is what I use now on my Pinecil and what I would recommend.
Description
A small but very effective anti-roll foot and mini stand for the Pinecil. It simply clips on and allows the iron to sit on your workbench without rolling around or tipping over. The foot does not interfere with changing soldering tips.
Available in default height (as pictured), as well as in a short and a tall version (-1.5 mm and +1.5 mm height). Scaling the model by +-0.75% in X and Y direction changes the main hole diameter by +-0.1 mm.
I'm using this on my Pinecil V2. It is technically not tested with the V1, but it should fit as well. According to Pine64, the shells of the Pinecil V1 and V2 are interchangeable.
Print settings
- Layer height 0.2 mm
- Line width 0.42 mm
- 3 wall lines
- 5 top & bottom layers
- Supports not required
Material should be one with a heat deflection temp of ≥65°C. PETG works fine on my iron, PLA will likely get soft and bend when in use.
Approximate print time @ 60 mm/s: 0:10 h