1 / 2
24V Motor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mount is for an amazon motor: https://www.amazon.ca/gp/product/B07YYY9KF8/ref=crt_ewc_title_srh_2?ie=UTF8&psc=1&sm
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 0
- Views
- 404
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I used PETG, so the heat of the DC motor doesn't deform the print. PLA could still work; obviously, don't let the motor get too hot. Printing is easy and supports come out quickly.
Required:
- Print at a 0.2 Layer Height
- Print with 30% infill
- Print at speeds between 45-60 mm/s
- Print at 245º for PETG or 215º for PLA
- Print with a Bed temperature of 80º for PETG or 50º-60º for PLA
- Print using supports
- Print with a Fan speed set to 25% for PETG or 100% for PLA
Optional (for better-looking and stronger prints)
- Set your Z-seam alignment to random
- Print with 6 walls and 6 top/bottom layers
- Turn on Z Hop When Retracted