Wallie(var) - Cash Module (coin tray+money clip)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an upgrade for the Wallie lever action wallet that can store cash and coins.
- Rating
- 4 / 5
- Likes
- 85
- Downloads
- 213
- Makes
- 1
- Views
- 2,545
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This module for storing cash and coins attaches to the back of the Wallie(var) with original screws and 5 M3 nuts.
It has dual hinges, each held together by an M3 screw (25mm or longer) and a nut. This provides increased strength compared to print in place hinges.
The lid is held shut by 12 6x2mm (same size as the ones for gridfinity) magnets, 6 on each side. These magnets have to be glued on the magnet covers first, and then the magnet cover has to be glued on the lid/frame.
The money clip has to be glued-on in between the two small printed marks on the lid. IMPORTANT: before gluing on the clip you have to cut those marks off, otherwise the lid won't close.
All materials needed for this build:
-7X M3 nuts
-2X M3x25mm or longer screws
-12X 6x2mm magnets
-Some form of adhesive (I used T-7000 glue for phone displays)
