Counting matching models…
One thing is for sure; cash is always acceptable as a gift and probably won't be “re-gifted”! We have always had fun calling cash gifts “Generic Gift Cards”, so I made up this little box to share the fun. I also included a "Universal Gift…
Remix of the amazing wallet by Mike (itself a remix). I only modified the magnet holes to fit my existing magnets of 5x2mm. Please download all remaining parts from the original model.
Witziges Geldgeschenk, gedruckt mit 0,2mm PETG Beschriftung wählen oder selbst beschriften und aufkleben - fertig :-)
This is a complete redesign of the original Pop-Up Credit Card Wallet Spreader with Coin/Cash Storage by Mike. I recreated every single part from scratch to make it slimmer, stronger, and more practical — without scaling the original…
Simple cash clip that prevents your notes from being creased. Very minimal material is used - perfect for using up the remaining bit of filament Suggested material for printing is PETG although PLA will work just fine. I printed my…
After finally getting tired of using the same envelope for the past 5 years, I decided it was time to treat my on-hand cash with a little more respect. I built this container in a somewhat optimistic size, but it should be plenty to grow…
💳 TPU Flexible Card Cash Wallet – Slim, Soft & Pocket-Friendly! 💳 Tired of stiff, bulky wallets poking you in the leg? Most 3D-printed card holders are made of hard plastic, but this one changes the game. Designed and made entirely for…
Compact Minimalist Wallet A simple, functional small wallet designed to hold a few essential items without the bulk of a traditional wallet. Perfect for carrying cash, checks, or a small stack of documents , this design keeps everything…
A Rugged Box customized for Euro Cash storage. Sizings : Are coming from Wikipedia : https://fr.wikipedia.org/wiki/Billets_de_banque_en_euro Internal dimensions (with nearly squared internal corners) : Width : 155 mm Height : 83 mm…
I added a small cone to the cash plate so it can hold my key in place as well. Feel free to modify the scad file so it fits your key. based on the original cash plate from https://lockcard.com
Designed for 98A TPU. 2 walls, 35% infill, 3 top/bottom layers, tree supports, 0.2mm layer height Includes a cut out for a Magsafe adapter ring, the SIM ejector that came with the phone, one credit card or ID and 1-2 emergency bills. Bill…
Wife found a M&D cash register with no coins, so I quickly mocked up some to print. Each coin is a single model that I split in two in the slicer so the faces would print on top. Can be done single color or with a color swap. My example…
Insert for the 2nd edition of Cash'n Guns. I printed the bottom part hollow to reduce weight. (Prusa video: https://youtu.be/6PVeh43Or-g ) Update_1: splitted the biggest box (Body_1) into two parts, which can be glued together if you have…
I wanted to have some emergency cash in my slim card wallet Thickness is similar to two regular cards It holds my european 20€ fold in 4 perfectly Printed on its bottom side with support for the bridge to make it as clean as possible
A simple cash register in the shape of a garbage can. I used a standard 0.20 speed profile for printing On Top i use supports For a nicer look, I screwed the side brackets and the bracket on the lid with M3x5 screws The lid is screwed…
My family has a tradition of making people work for cash or gift cards if they do not give a suitable suggestion for their birthday. So this year I decided to take advantage of my 3D printer to fully encapsulate some cash for one of my…
If you find my designs useful, please consider sending a tip The coin tray on my 6"/150cm wide Helix Cash tin broke, so recreated it in Tinkercad. Print Settings: Quality: 0.2 Infill: 40% Brim: Yes (Personal Preference) Supports: Yes -…
Printed it with ABS 100% infill. Assembly will be tricky. You'll have to drill a mounting hole to green coin funnel to install the M6 nut. I used a nylon lock nut, so that it doesn't tighten up too much when income gets big =). It helps,…
Eine handliche und sehr strapazfähige TPU Geldbörse für Scheine, Cards und Münzen - mit einem offenen Münzfach für je 3 Euromünzen eines Nennwertes (ohne 1 und 2 Cents). Die Münzen klemmen im aus TPU gedruckten Münzhalter und sind gegen…
Cash box based on Whity's very well designed “Rugged Box (Parametric)”. Total outer dimensions: 189x185x79mm I replaced the original latches by articulated ones that I find more secure. Assembly: You need 6pcs. of M3x30 screws. The latch…
This module for storing cash and coins attaches to the back of the Wallie(var) with original screws and 5 M3 nuts. It has dual hinges, each held together by an M3 screw (25mm or longer) and a nut. This provides increased strength compared…
I like to send my nieces and nephews annoying gifts and puzzles. This requires eight screws of two different types to be removed to find their cash gift encased in a semi-translucent block, It snaps in half easily, but I wonder how long…
I made this with the idea that it can hold emergency cash or credit cards. The idea, (instead of freezing your credit card in a block of ice) is that it should be easy to get money and cards in, but very difficult to get them out to use.…
This 3D cash tray design stands out for its simplicity and elegance, making it a functional and aesthetic option for organizing bills, coins, and other small items. The tray features a completely smooth surface with no compartments,…
One thing is for sure; cash is always acceptable as a gift and probably won't be “re-gifted”! We have always had fun calling cash gifts “Generic Gift Cards”, so I made up this little box to share the fun. I also included a "Universal Gift…
Made this wallet with a couple designs that were severely modified to get what I was looking for. Made to print and assemble so you can have multiple colors. Made design with base as when I tried printing my first cascade wallet, I could…
Charity box, Cash Saving box or other valuables, use 3 - 4 cm size of lock
Replacement for a broken cash register lever. Printed laying on the side with supports. Print Settings Printer Brand: Anycubic Printer: i3 Mega **Rafts:** No Supports: Yes **Resolution:** 0,15 Infill: 15% **Filament:** Geeetech PLA yellow…
Replacement for a broken cash register lever. Printed laying on the side with supports. Print Settings Printer Brand: Anycubic Printer: i3 Mega **Rafts:** No Supports: Yes **Resolution:** 0,15 Infill: 15% **Filament:** Geeetech PLA yellow…
Keep your harmonicas safe, dust-free, and ready to play with this 3D Printed Gridfinity Bin , meticulously designed to store a Casha Blues Harmonica and a Hohner Marine Band Harmonica —each with its protective case. This modular storage…
size: 57X42mm tooth length 7 mm needs some fine tuning but overall does the job
Lay your check in the middle when you are ready to scan it. It makes the process easier so you don't have to look for a solid blank dark colored surface to scan on. Outer Dimensions 3.94x7.24x0.24 | inches 100x184x6 | mm Inner Dimensions…
Customer Display for IKEA DUKTIG cash register :) there are two STL files with all parts - with and without price
I needed to provide a monetary gift but wanted some way to do it besides including it with Christmas Card. I took measurements a design the cash box using fusion 360. I imported and added the snowflake and candy cane SVG's. I placed in on…
Cash Tray for an old WEDO Cash box I found this pretty old Cash Box somewhere between my things and wanted to make it functional for maybe a bit spare change. I searched online for a tray that would fit it, but didnt find one. So i made…
This is a small keychain wallet that can hold up to 5 bills in it very securely.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
Insert for Cash 'n Guns Team Spirit expansion Printed with 5% infill, in 2 parts to fit MK3S+ can hold the envelope tokens, mercenary cards and guns characters and other normal cards can fit the base game insert…
Couldn't find any models that fit my wants so I made my own. Print two of the same model then use either a rubber band or optionally a hair elastic. Was made for usd but might fit other currency as well.
A friend of mine want me to make a sign for her customers which informs that there is only payment using BLIK or Cash. So here they are, maybe some of you will also use it :) There is pause add for non-ams printers to swap the filaments.…
This fits this cashbox: https://a.co/d/2F6zHYv The box is available in several different colors and has a combination, which I like so I don't have to keep track of the key between events. The only issue is that I usually travel with this…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
A simple cash box I made for my safe. Made with Shapr3D Please leave a like and rating, really helps me out! Ceadd https://ceadd.ca Makers World https://makerworld.com/en/@ceaddl
Cash & Coin Storage Module After using the Dumb Wallet, I realized it was missing a dedicated place for cash and coins. This module was designed to fill that gap. It stores both coins and cash and is compatible with the Dumb & Dumber…
I needed a box to sort money of different denominations and couldn't find one that fit all of them. I made this one with 7 openings to cover $1, $2, $5, $10, $20, $50 & $100. If you don't need all of the denominations you can always cut…
Remix of the amazing wallet by Mike (itself a remix). I only modified the magnet holes to fit my existing magnets of 5x2mm. Please download all remaining parts from the original model.
A replacement for the actuating arm that rings the bell and opens the tray for these classic toy cash registers. Needs to be printed laying flat, with support. Ideally you use some tricks like support material with big interface, or…
I attached mountingpoints for a regular hairband at the sides. This way cash is securely stored and the model keeps its signature look. Prints really well in PLA at 0.1mm!
This bead has a secret compartment to store an emergency dollar bill. Hidden in plain sight, few people will think there may be something valuable inside. This secret compartment bead is designed so that it can be opened and closed while…
Sliding coin storage that uses friction to prevent the coins from falling out when held upside down as well as magnets in the drawer part so in case you open it really fast to look for change the coins don't shoot out all over the floor,…
A dollhouse (1:12) sized tablet based cash register / point of sale credit card terminal. The table is based on an Ipad pro, but thickened 4x so as to not be too fragile. If you have a really well dialed in printer, the bottom may be able…
Hello, I present you Mobi Parking Skycash Bank Pekao Hope youll like it
When I blow up my laser engraver I need to start saving money fr the new one. But I haven't got a money bank. So I designed it and printed. Now I can saving the money for the new and better laser engraver. The screws you need to a little…
The Finals – Cashout Station | STL Fan Model Are you a fan of The Finals? This 3D model is a recreation of the Cashout Station, perfect for gaming decor, dioramas, and now also as a keychain! It includes details optimized for multi-color…
Witziges Geldgeschenk, gedruckt mit 0,2mm PETG Beschriftung wählen oder selbst beschriften und aufkleben - fertig :-)
Design Concept The tiered cash box is designed for easy organization and quick access to different denominations of money. Its sloped tier design enhances visibility and efficiency, making it an ideal accessory for shops, events, or…
With all the toys and stuff in the market I hate giving kids junk from walmart for a theme party. Every kid wants cash, I found the original model, adapted it to a box with magnets, and decided it was the way. You can embed the box…
Print settings: Infill: Does not matter Brim: Most likely Supports: None Material: Tested with Petg others will work too. Note: Dont push your cash too far in cause it might get stuck.
cute little box perfect for a lemonade stand or for kids to stash their money. Holds cash and coin!
This is 3 models, one for each coin that comes with the kids toy Fisher Price Cash Register. We received this as a hand-me-down and it only had 3 coins. ** This design is for the cash register that has 3 of the same size coins ** I…
pringles lid with coin slot and cash spot fits best at 83mm in diameter
RESIN Standard 405nm 50cure, 1mm layer Filament 1.75mm 216F Noz , 70bed, 35 Speed, Brim , 3m walls
This is a single print to replace the barge/train tokens for Brass Lancashire or Brass Birmingham. Like the cardboard link tokens, this is double sided. It was heavily remixed from the Train and Barge tokens by Sabsi, but merged to be a…
This model features six angled slots perfectly sized to hold paper currency, receipts, or envelopes in a clearly visible and easily retrievable layout. Features: Holds up to 6 stacks of bills or paper items Slanted design for easy…
Printed with PETG structural settings 0,2mm with supports. Fits to 9mm base plates. Cash register is from Thalia (SpielMaus Küche Kasse mit Laufband und Zubehör).
Print settings K1C printer, 1H 44min print time, 15% infill, 0.12mm layer height, no supports needed
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker The capsule is large enough for a couple of house keys and…
jest to mój autorki projekt który można swobodnie edytować pod siebie dodając różne napisy itp
Meine Geldkassette hatte keinen Einsatz für Münzen mehr. Jetzt schon ;-) My cash box no longer had a tray for coins. Now it does. Category: Replacement Parts
These kept breaking at work, so I modeled a generic replacement. Printed in ABS, these don't last as long as the originals, your mileage may vary based on material choice and printer settings.
Design Concept This Cash Box with Lid is designed for organization and security of money or small items. The compartments are clearly labeled for different denominations, helping users sort and quickly access their cash. Use Ideal for use…
I have designed a box for euro cash. It has space for 4 different bills, 100€ will fit too, and 3 coin sections. The Box has the size 4x3 and is perfectly for the large Ikea Alex drawers. No special settings need, I used 10% infill.
this is a simple cash wallet that fits great in a pocket and can carry up to 5 US bills
Carry a piece of your favorite superhero with you every day! This slim, 3D-printed wallet is a tribute to the iconic worlds of Spider-man and Venom. The classic red, black, and white design features the bold Spider- man logo on one side…
This 3D printable cash tray is designed to help you keep your money organized and easily accessible. It features: Three compartments for coins – ideal for separating different denominations. One large compartment for banknotes – with a…
Simple sprung spacer for when not using the full card capacity of this wallet: https://www.printables.com/model/796303-pop-up-credit-card-wallet-spreader-with-coincash-s Helps cards eject out consistently and rattle less when stored away.…
When people see my other designs, people can see I like the sliding lid design (a lot). Doesn't take a lot of space etc. What's not to like? I also like tvkili's design for the brass players. Therefore I decided to make a nice sliding lid…
Cash box tray with the dimensions 196mm*140mm*30mm. The recess for the locking mechanism is 70mm*15mm. The contact surface is 5mm wide. printable without support hope you like the model
This is a complete redesign of the original Pop-Up Credit Card Wallet Spreader with Coin/Cash Storage by Mike. I recreated every single part from scratch to make it slimmer, stronger, and more practical — without scaling the original…
Quick simple cash box i whipped up to store my tips from work because all the other options on here kind of sucked or were not a great fit. Fits Canadian bills perfectly. Base model is about 45mm in height and large model is about 90mm in…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept The…
Just a simple Tinkercad remix of ziggyzig's https://www.thingiverse.com/thing:5674887 without the text around the bottom. Make sure to visit the original thing to give thanks for the initial idea! Category: Keychains
The original design for the retail version of this Brass Lancashire insert was mostly really sweet. I especially like the sliding/snap-in lids for the boxes. Unfortunately, it looks like there are some differences between the files…
just give somthing to that annoying sibling and make them work for it! :) LEAVE COMMENTS OR ELSE!!
I was super interested from a brand's aluminum machined Keychain and got me thinking if i can manage to 3d design and print a model as close as possible to that. I made it, it works flawlessly :). After many attempts those below was my…
Materials Needed 20mm wide elastic band 5 M3 x 4 screw 11 M3 x 3 screw Assembly To assemble sew the elastic band length wise around both of the inner plates for a tight fit Sew another a section of elastic band width wise to fit the…
The cover is used for all cash registers with a round hole with a diameter of 30 cm to 34 cm. The cover is improved with two handles for easier removal of the closure and is ready for printing without supports.
This is a cash box holder that you can neatly store money in. Place the cover on top to press down the cash.
