Desk/Plant Lights - E27 Socket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a stronger E27 lamp holder for a grow light setup. Printed and assembled with M5 screws.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I recently decided to add a grow lamp to my plant, but the socket I had was E27, which wasn’t ideal. The original E27 holder was a bit weak, so I designed a new, stronger version: Lamp_Modular_E27_Holder v2.
With a little Tinkercad magic, I modified the lamp support to fit my socket by removing a part and adding a custom hole. For the lamp build, I printed the following:
- 2x Arm_150_wchannel.stl
- 1x Arm_90_wchannel.stl
- 1x Arm_Axis_Changer_v5.stl
- 1x Lamp_Modular_E27_Holder v2.stl
Then, I used M5x20mm screws to put everything together.
Note: As mentioned in the original remix, the arms print a bit awkwardly around the cable run, but since I didn’t need that part, it worked out just fine.
If you find my design useful or it inspires your next project, feel free to show your support with a coffee or a beer—cheers! 🍻☕