Voron2 - Kinematic Bed

Voron2 300 - Kinematic Bed with MGN12

Since the bed on Voron thermally deforms by 0.5-1mm depending on the temperature.
Something had to be done about it, and this solution was quite interesting.
We adapted it to the linear MGN12 that was at hand.
The whole thing works well and most importantly the bed holds firmly, see photo.

We used 4x heat inserts M3xD5xL4 and a couple of M3 screws.

Print from ABS, ASA, PC or PA (CF)

Nozzle Cleaner and Purge Bucket - Kinematic Bed with MGN12:
https://www.printables.com/model/1147423-voron-cleaner-and-bucket-kinematic-bed 

BED mount aid - Kinematic Bed with MGN12:
https://www.printables.com/model/1148515-voron2-bed-mount-aid