Voron2 - Kinematic Bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron2 300 - Kinematic Bed with MGN12
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 1179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Voron2 300 - Kinematic Bed with MGN12
Since the bed on Voron thermally deforms by 0.5-1mm depending on the temperature.
Something had to be done about it, and this solution was quite interesting.
We adapted it to the linear MGN12 that was at hand.
The whole thing works well and most importantly the bed holds firmly, see photo.
We used 4x heat inserts M3xD5xL4 and a couple of M3 screws.
Print from ABS, ASA, PC or PA (CF)
Nozzle Cleaner and Purge Bucket - Kinematic Bed with MGN12:
https://www.printables.com/model/1147423-voron-cleaner-and-bucket-kinematic-bed
BED mount aid - Kinematic Bed with MGN12:
https://www.printables.com/model/1148515-voron2-bed-mount-aid