1 / 14
QRP Antenna balun with WAGO terminal
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:1 or 1:4 current balun for wire antennas
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 57
- Makes
- 0
- Views
- 900
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
The 3D printed box contains a 10mm hole for sliding on top the Fiber glass mast.
The PCB contains a terminal for soldering SMA or BNC connectors (not used in this implementation).
VNA measurements screenshot are with a non-ideal 51 ohm resistor.
BOM
PCB - see gerber source data
1x Ferrite Toroid 73 with 2x three turns of twisted conductor/pair
2x WAGO terminal (+ others for division by dipole into individual bands)
1x PCB board (gerber data included in attached zip file)
6x M3x20mm
6x M3 nuts
RG316 RF coax cable
optional Guy rope winder
Fibre glass mast 6m / 0,65m
