QRP Antenna balun with WAGO terminal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:1 or 1:4 current balun for wire antennas
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The 3D printed box contains a 10mm hole for sliding on top the Fiber glass mast.
The PCB contains a terminal for soldering SMA or BNC connectors (not used in this implementation).
VNA measurements screenshot are with a non-ideal 51 ohm resistor.
BOM
PCB - see gerber source data
1x Ferrite Toroid 73 with 2x three turns of twisted conductor/pair
2x WAGO terminal (+ others for division by dipole into individual bands)
1x PCB board (gerber data included in attached zip file)
6x M3x20mm
6x M3 nuts
RG316 RF coax cable
optional Guy rope winder
Fibre glass mast 6m / 0,65m
