Low-profile DIN rail clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low-profile DIN rail clip for builds with limited space. Sturdy and reliable solution.
- Rating
- 4.333 / 5
- Likes
- 512
- Downloads
- 1,998
- Makes
- 5
- Views
- 7,051
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This DIN rail clip has a pull tab to release it from the rail. A flathead screwdriver or Allen wrench can be used to pry/hook and pull the tab.
Spacing between holes is 31mm.
Triangle symbol on the clip shows correct orientation with the mount.
Required parts:
2x M3x5x4 brass insert (Voron BOM standard insert) (example: Cnckitchen store)
DISCLAIMER: This model has very tight tolerances around the release tab, make sure your printer is well-calibrated to have a fully functional print. Compatible Only with standard 35 × 7.5 DIN rail (IEC/EN 60715)
Print settings:
0.2mm layer height
4 wall perimeters
4 top/bottom layers
40% infill
Currently only tested with ABS/ASA and PETG