Low-profile DIN rail clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile DIN rail clip for builds with limited space. Sturdy and reliable solution.
- Ocena
- 4,333 / 5
- Polubienia
- 512
- Pobrania
- 1998
- Wydruki
- 5
- Wyświetlenia
- 7051
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This DIN rail clip has a pull tab to release it from the rail. A flathead screwdriver or Allen wrench can be used to pry/hook and pull the tab.
Spacing between holes is 31mm.
Triangle symbol on the clip shows correct orientation with the mount.
Required parts:
2x M3x5x4 brass insert (Voron BOM standard insert) (example: Cnckitchen store)
DISCLAIMER: This model has very tight tolerances around the release tab, make sure your printer is well-calibrated to have a fully functional print. Compatible Only with standard 35 × 7.5 DIN rail (IEC/EN 60715)
Print settings:
0.2mm layer height
4 wall perimeters
4 top/bottom layers
40% infill
Currently only tested with ABS/ASA and PETG