IKEA Skadis - Hook / Háček (10mm - 100mm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.27 – €0.33 net (excluding VAT)
For file: Ikea_Skadis_hooks_4.6mm_0.25mm_PLA_MINI_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.30 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Set of different size hooks for IKEA Skadis board - 3 tolerances for tight fit
- Rating
- 5 / 5
- Likes
- 198
- Downloads
- 1,280
- Makes
- 32
- Views
- 3,147
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hooks which I designed from scratch, inspired by “Pavel”. The original hooks didn't work as planned, they were too tight and the “one hook, one pin” design is not good, I also damaged the board in several places when removing the original ones.
This design works with 2 hooks, which is much easier to install and also remove, but holds very well thanks to the small bumps on the hooks:
I made all the sizes from 10mm to 100mm with 5mm increments, so it should be enought for all the use cases.
Print instructions
- I used PLA, but any material should do
- No supports needed
- 4+ perimeters for added stiffness
- 3MF file with all the sizes + 4 perimeters
Update 01/01/2022
I just found out that one of my boards has thickness of 5mm, but the other one has just 4,9mm, meaning the fit is not tight as it should be, so I uploaded new files with hook clearance 4,8mm and for even more tight fit - 4,6mm.
Depending on your board thickness you want to use files:
- 5mm board - 4,9mm hook clearance
- 4,9mm board - 4,8mm hook clearance
- <4,9mm board - 4,6mm hook clearance