Computer Power Switch Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Computer Power Switch Housing
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 88
- Makes
- 2
- Views
- 742
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom power switch housing I made for a Mining Rig. I printed the housing and the buttons on a texture powder coated sheet. The backplate was printed on the smooth sheet for the best adhesion. The buttons can be set up as a MMU2s print, first import the buttons then right click and add part, select the Green, and then the Red.
Here is the link to the power switch I used:
https://www.amazon.com/gp/product/B074XDTVN1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Two screws hold the backplate to the housing, and there are two mounting holes to mount the housing to a frame.
Share a picture if you print one!