Bosch 1617EVS 2x4 jig
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.48 – €7.92 net (excluding VAT)
For file: baseplate_jig_0.2mm_PLA_KP3S_5h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.20 excluding VAT (range midpoint).
- Weight reported by the author
- 120 g
- Print time reported by the author
- 5.76 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A jig for cutting groves in 2x4 or 2x3 side profile.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm.
The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d printed object but may not be enough for dimensional lumber. For what samples that I have this tolerance works for the most pieces.
If you have lumber that's close to 39mm thick (or thicker), prepare it with a planer. Thick, unprepared lumber will cause jig to get stuck and if you apply more force, this will cause sudden jerk of the router which would shatter the router bit. Ask how I know.
Print instructions:
- PLA
- 2 layers everywhere: perimeters, top, bottom
- 15% infill