Ulanzi adjusting gasket grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d modeled a bigger diameter with texture to have better grip on the adjusting gasket.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
The adjusting gasket was too small and hard to grab, I made this to friction fit I made the tolerances pretty small .2 or so, if you still find it too tight to press yours in may want to calibrate your printer.
I printed this in ABS, PLA should be fine, and this should be fine to print in ASA, or PETG for UV resistance. I printed at .2mm layer height, walls 5 is what I used less is probably fine and for infill I had 50% gyroid or adaptive cubic, but 100% infill will be fine too or 6 walls its not a model thats going to be abused anyways.