FLSUN T1/Pro LED Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Cover for T1/Pro to reduce the illuminated camera recordings.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 50
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I find the images from the factory-supplied camera to be much too bright. I'm currently using a different camera, also with a low-light chip, but the problem remains.
The LED cover is 200 mm long and can block up to 80% of the light.
About 17g of filament is required for printing, I recommend PETG or something similar, PLA quickly reaches its limits at build chamber temperatures of around 50°C.
The following is required for assembly:
- 2.0 HEX screwdriver
- 200 mm double-sided adhesive tape
- Craft knife similar to a scalpel
(The figures are intended to illustrate the overexposure when there is too much light. The angel and devil were printed on my T1 and the beachlady on my J1.)