1 / 2
V-CORE 4 Idex T0 belt retention to opposite side.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I changed the idex T0 fan / belt retention to be on the opposite side so I / you don't break them taking the belt off.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 1
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I changed the idex T0 fan / belt retention to be on the opposite side so I and you don't accidentally break your hotend wires while changing belts. It should also cut down on the amount of zip ties you use while messing with belts (b/c you had to cut them each time before to remove the belt).
- Perimeters: 4
- Line Width: 0.45mm
- Layer height: 0.2 - 0.3 mm
- Infill: 25%
- Supports: None