1 / 2
V-CORE 4 Idex T0 belt retention to opposite side. — zdjęcie 1
1 / 2

V-CORE 4 Idex T0 belt retention to opposite side.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I changed the idex T0 fan / belt retention to be on the opposite side so I / you don't break them taking the belt off.

Ocena
0 / 5
Polubienia
5
Pobrania
25
Wydruki
1
Wyświetlenia
327
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I changed the idex T0 fan / belt retention to be on the opposite side so I and you don't accidentally break your hotend wires while changing belts.  It should also cut down on the amount of zip ties you use while messing with belts (b/c you had to cut them each time before to remove the belt).

  • Perimeters: 4
  • Line Width: 0.45mm
  • Layer height: 0.2 - 0.3 mm
  • Infill: 25%
  • Supports: None

Tagi