M4 Sherman Fridge Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stylized M4 Sherman as a magnet.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 16
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I printed it with 0.2mm nozzle for highest fidelity, but a 0.4mm nozzle will work with Arachne perimeter generation
Outline magnet of an M4 Sherman tank. Holes on the back are made to fit 2 of these magnets. https://www.amazon.com/gp/product/B08Y5YZN5C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I just glued them in. If i remade it now I might make it to where I print them inside the tank so no glueing is required.
There are two variations. One has the two colors as separate STLs. This is how I made it and just painted them and glued them together. I also added a single STL if you want to print them with a color change. The single piece version has a bunch of open edges according to the slicer, but it should print fine whether you repair them or not in the slicer.