D20 Magnetic Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.31 – €6.49 net (excluding VAT)
For file: Magneto V4.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.90 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keep your stuff safe in this 100mm (3.9") D20 storage box
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 34
- Makes
- 3
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Public Domain
This is a simple D20 with a lid and in the main part it has a spot where you can store stuff, like dice, money, candy, and whatever else you can fit. It's 100mm at the largest point (while the top and bottom are connected) I added a tab to easily pull it apart.
I used 5 magnets on the top and bottom that are 7mm x 2mm basic magnets I bought on Amazon in a pack of 200 for $10 or so. I used superglue to glue them in, and they're a tight fit which is exactly what I wanted.
I printed this in place because I couldn't get it to print with supports. I rotated it so one face of one number on each part was in place.
If you have any recommendations on a better way to print this, let me know!