tp-link TL-SG1005P switch bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket designed to adapt the tp-link TL-SG1005P desktop switch for rack mounting
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently purchased a tp-link gigabit PoE switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting.
The bracket model is one piece, which should fit on most models of printer. There are also small ventilation slots incorporated into the design to avoid blocking the switch's side ventilation holes.
The bracket is printed in PLA, 3 perimeters, 3 top and 3 bottom layers and 20% infill. The brackets are designed to be mounted to the bottom of the switch using the existing keyhole mounting solution. The model was printed flat on the bed, so you will need decent bridging abilities, or otherwise add support.
The bracket requires 10 brass inserts (2 on the bottom and 4 on each side), however, you may not need to populate all the brass inserts on each side. I've got 3 screws on each side and it seems sufficient to hold it securely.
Model No: TL-SG1005P(UN) Ver5.0