1 / 4
KINGROON KP3S base with built-in PSU and tool storage box — image 1
1 / 4

KINGROON KP3S base with built-in PSU and tool storage box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Functional and ergonomic design of the base for the Kingroon KP3S 3D printer with a built-in PSU and a storage box

Rating
0 / 5
Likes
13
Downloads
79
Makes
0
Views
489
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Like many owners of this wonderful Kingrun KP3S 3D printer, I am tired of the PSU that took up extra space on my table. A quick search on Thingiverse gave me an option that I liked in almost every way. It is a really ergonomic and technical solution and I am very grateful to the author for developing this idea.

The main thing that I didn’t like was the location of the power button and the power cable socket on the left side of the base (But this decision has a reasonable justification, and it is not for nothing that the author included these elements only on the left). Since the printer already has a protruding space at the back (the stepper motor) it seemed logical to me to place the power interface on the same side right under the motor. It also seemed a good idea to organize a convenient and quickly accessible place for storing frequently used tools under the protruding part of the heated table.

So I took the original model from goodjung, mirrored it and slightly improved the concept. in particular:

  • I changed the wall thickness, reducing the material consumption by 17%;
  • Moved the power supply mounts to the left;
  • Moved the hole for the power interface to the right side of the base;
  • Modeled a tool storage box that fits perfectly into this design.

I like the final result - this is exactly what I wanted.
However, there are a few downsides that are worth considering for those who want to repeat this:

  • moving the power module and cable socket to the right required extending the wires by about 5 cm (nothing complicated, but you should know about it in advance);
  • the base itself, like in the original design, uses self-adhesive rubber feet from the printer, but for the storage box you have to use something else (for example, buy a set of rubber feet on AliExpress or, like me, use plumbing rubber pads that are ideal for this);
  • you need fairly long (35 mm and longer) M3 screws - this came the original design and I didn't change anything here.

If you don't want to extend the wires or you don't need a box for storing small items, use the original design from the author - it will completely satisfy your needs.

Overall, I find the resulting design very functional and am grateful to the author of the original idea for the concept.

Tags