KINGROON KP3S base with built-in PSU and tool storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional and ergonomic design of the base for the Kingroon KP3S 3D printer with a built-in PSU and a storage box
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Like many owners of this wonderful Kingrun KP3S 3D printer, I am tired of the PSU that took up extra space on my table. A quick search on Thingiverse gave me an option that I liked in almost every way. It is a really ergonomic and technical solution and I am very grateful to the author for developing this idea.
The main thing that I didn’t like was the location of the power button and the power cable socket on the left side of the base (But this decision has a reasonable justification, and it is not for nothing that the author included these elements only on the left). Since the printer already has a protruding space at the back (the stepper motor) it seemed logical to me to place the power interface on the same side right under the motor. It also seemed a good idea to organize a convenient and quickly accessible place for storing frequently used tools under the protruding part of the heated table.
So I took the original model from goodjung, mirrored it and slightly improved the concept. in particular:
- I changed the wall thickness, reducing the material consumption by 17%;
- Moved the power supply mounts to the left;
- Moved the hole for the power interface to the right side of the base;
- Modeled a tool storage box that fits perfectly into this design.
I like the final result - this is exactly what I wanted.
However, there are a few downsides that are worth considering for those who want to repeat this:
- moving the power module and cable socket to the right required extending the wires by about 5 cm (nothing complicated, but you should know about it in advance);
- the base itself, like in the original design, uses self-adhesive rubber feet from the printer, but for the storage box you have to use something else (for example, buy a set of rubber feet on AliExpress or, like me, use plumbing rubber pads that are ideal for this);
- you need fairly long (35 mm and longer) M3 screws - this came the original design and I didn't change anything here.
If you don't want to extend the wires or you don't need a box for storing small items, use the original design from the author - it will completely satisfy your needs.
Overall, I find the resulting design very functional and am grateful to the author of the original idea for the concept.