Hbb Knomi V2 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Built from the ground up using BTTs Hbb case as a base. Inspiration came from Stacking Layers design. I tried twice to print it, and while it came out good, the fitment was poor. Both times breaking the pcb standoffs nearest the usb, and the lack of symmetry really tickled my tisim. I filled all mounting holes. I can add them and upload if there is a general agreement as to how and where. I figure they can be added easily to the end users need in the slicer.
Mounting hardware is:
2x 3x20mm cap head screws
2x 3x12mm cap head screws
Pictured is printed in PETG, using 2 parameters, 3 top and bottom layers, and 15% Gyroid infill.
Time was ~2 hours per half.
Please check out his design and drop a like or whatever.