1 / 5
Spirograph Sand Art using Arduino UNO
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed spirograph sand art.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Model assembly require 6x m3 screws and 5x 2mmx4mm magnets, Arduino UNO, 28BYJ-48 Stepper Motor and ULN2003 Driver.
4 magnets to be placed inside the slot given on the CRANK (and please make sure the polarity of the magnets during placing them in the slots such they they don't repel each other).
I used white sand for the pattern to traced by the magnet. The magnets under the top plate attract the magnet placed on the sand.
Arduino can be powered externally using a 5V adapter