kitchen faucet installation tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.71 – €6.98 net (excluding VAT)
For file: Keukenkraan installatie tool_0.3mm_PLA_MK3S_4h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.34 excluding VAT (range midpoint).
- Weight reported by the author
- 116 g
- Print time reported by the author
- 4.59 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Installation tool for kitchen faucets
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 108
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our kitchen faucet was installed by a professional but came loose after extensive use … since I didn't have a tool to refix it and regular wrenches did not work in the tight space and upside down, i designed a tool that you can put round the fixing nut (with all the wires and tubes coming down) and turn it from below and possibly lying on your back under the sink …
It is prety sturdy so should be strong enough when printed up right … this tool is not for professionals (they should have metal parts like this) but it works in a pinch …
PLA works but ABS or ASA (maybe PETG) would be better.
I did not make any photos while using it as the position i was in and, lighting situation and the tight space did not allow for it (maybe later).