Tall Headphone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These stands are my first original designs optimized for 3D printing.
- Rating
- 4.8 / 5
- Likes
- 44
- Downloads
- 571
- Makes
- 5
- Views
- 2,348
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These stands are my first original uploads. I used the makerbot headphone stand for quite some time, and gradually found changes I wanted to make for an improvement. I also designed it specifically for ease of printing. No supports are needed and the chamfered edges should give a good finish on any machine or layer height. This design is the tallest I could print on my MK3, and can hang most large gaming headphones. I also added a hanger for loose cables.
Print instructions
This print does not require any supports, a brim is suggested
Any layer height will work, 0.2mm or 0.3mm will print fastest
The print weighted is about 165g - 250g depending on print settings
2 perimeters and 10% infill should be strong enough for any headphones. If you like to slam down your headphones then maybe for 3 perimeters and 20% infill would be better