Pulley + 608 bearing (kladka + ložisko 608)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pulley with hanging holes on both sides. Kladka s oky pro zavěšení na obou koncích.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
Required hardware
1x - M4x16 mm cylinder head screw (hexagonal)
1x - M4 nut
1x - 608 bearing
Types for printing and using
To increase the strength of the pulley, I recommend increasing the number of perimeters, the print filling does not have much effect on the strength.
For use, it is necessary to glue the interlocking ends of the pulley with a suitable adhesive. Printing at a layer height of 0.3 mm is OK.
-------
Potřebný hardware
1x - šroub s válcovou hlavou M4x16 mm (na imbus)
1x - matice M4
1x - ložisko 608
Typy pro tisk
Pro zvýšení pevnosti kladky doporučuji zvýšit počet perimetrů, výplň tisku nemá na pevnost příliš velký vliv. Tisk při výšce vrstvy 0,3 mm je OK.
Pro použití je potřeba přilepit do sebe zapadající konce kladky vhodným lepidlem.