Pokemon TCG Tin box Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert for the PokemonTCG tins that can hold a 60 card deck. Files for both 3D printing and a vacuum form buck
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 55
- Makes
- 0
- Views
- 1,409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently went through my Pokémon cards to make a deck, and realized that I didn't have a box for them. I could use the many (very nice) 3dprinted deck boxes on this site, but I wanted to use some of my old card tins. I used the measurements of the Dagonite tin, but they should all fit the same. (note that some tins are taller and might need a riser to lift them up… or just print two and stack them!)
Also included is a ‘lid’ of sorts to hold the cards. I have inverted the tin, had it loose in the back of a backpack, etc., and the lid held the cards nicely in the print.
I made the insert the size of a cardboard deck box, so it should fit snug but loose enough to easily get the cards out. No idea if they will fit with sleeves because I simply do not own any sleeves
(EDIT! I recently got some official Pokémon sleeves this weekend from an anime convention, and the default size is JUST a bit too small. there is some space, so you should be able to print the model at 103% - 105% and it should all fit just fine with the sleeves)