LED Weihnachtsbaum / LED Christmas tree
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.64 – €2.00 net (excluding VAT)
For file: AK_LED Christbaum-Gehaeuse.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.82 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sockel für den Weihnachtsbaum von Roboterbausatz.de
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Sockel für den LED Weihnachtbaum von Roboterbausatz.de
https://www.roboter-bausatz.de/p/bausatz-led-weihnachtsbaum
Für den Sockel werden zusätzlich noch 10 Schrauben 2,5 x 10mm benötigt.
Viel Spaß beim Drucken.
--------------------------------------------------------------------------------------------
Base for the LED Christmas tree from Robotbausatz.de
https://www.roboter-bausatz.de/p/bausatz-led-weihnachtsbaum
An additional 10 screws 2.5 x 10mm are required for the base.
Have fun printing.