Crowntail Betta | HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 75mmx100mm hueforge of a crowntail betta using 4 colors.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm
The Model is 75.32x100mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.8mm) swap to Blue Gray
At layer #7 (0.88mm) swap to Red
At layer #15 (1.52mm) swap to White for the rest.