Sabertooth blinking mask/ fursuit headbase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mask can blink and stick its tongue out by using the wearer's facial movement, it has magnetic eye blanks :)
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 200
- Makes
- 0
- Views
- 1,428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Standard Digital File License
This object is licensed for PERSONAL USE ONLY. For commercial use contact me at instagram: @portallabs
Materials:
PETG / PCTG
PP / PETG / PCTG for the flexures
Very Important:
Correct slicing orientations are specified in the nose_blinking.3mf and eyes.3mf files.
For the flextures:
use at least 2 perimeters
do not exceed 60mm/s print speed on external perimeters
set Slice gap closing radius to 0
check with the included slicer screenshots that the thin part goes all the way inside the flexure body and that it has the seams placed at the end
For the eyes:
Disable top and bottom layers for the bottom wafer (with a height range modifier) and set perimeter count to 5 so that the infill shows through, this will create your eye mesh, use Grid infill from 50% to 70% and test In the mirror through which one you see the best while still being opaque to the outside.
Bill of Materials:
Blinking Module:
Screws:
8x M3 x 10mm tapered
3x M3 x 15mm flat
4x M2.5 x 4mm flat
2x M2.5 x 3mm flat
2x M2.5 x 7mm flat
String
Magnets:
20x 5mmx5mm cilindrical magnet
Headbase
Screws
13x M3 x 8mm flat
1x M3 x 20mm flat
2x M3 x 15mm flat (for mounting the eye module to the base)
2x M5 x 10mm flat
Springs
2x spring (for jaw)
1x spring (for tongue)
HeadStrap