190 models
Hi guys <(^^ )> ---------------------------------------------------------------------------------------------------------------- Vous aurez besoin de 4 couleur. L'AMS n'est pas nécessaire pour cette impression. 18 min d'impression. I love…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
found this lil guy on my old drive, no idea where i got him from
Bill Of Materials PETG and TPU Flexible fabric for mouth movement. (Can be replaced with a spring or rubber band) Hot glue Foam 2x 5mm screws and nuts (Can be replaced with 3d printed stick and stop) Fuzzy fabric in the colors you want.…
I made this claw model for a cat fursuit. The holes are meant to be used for sewing the claw to the glove. Adjust the size for each finger before 3d-printing. Print with a flexible material like TPU.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are NOT made for 3D printing.…
Introduction: This is a round glasses frame designed for fursuit heads with lots of customizable options! Upadte (2023/11/19): The code has been improved so the visualization runs faster. Added new parameters HingeHeight and BridgeHeight.…
These tongues were designed for fursuits and puppets. Print them with flexible materials - like TPU. You can use Cura's Fuzzy Skin setting to make the surface more realistic. Print Settings Printer: Alfawise U10 Rafts: No Supports: No…
Note: A new and improved version of this design has been uploaded. You can customize how big the ring is, how big the opening is, and how thick the ring is! I strongly recommend giving it a try!! Each ring has a 5mm/0.2inch opening Each…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The model is scaled for costume size…
These models were made for fursuit eyes with a fine mesh for the iris and pupil. The mesh part is not 3d-printed (I make those with laser-cut laminated waterproof prints). Print these models with flexible filament (like TPU) - you do not…
Why I modified the model: I noticed the internal corners of the follow-me eye blanks in some fursuit heads are fairly noticeable, if the eye blanks have hard right angle internal corners. What I modified: I added 80mm radius rounded…
I made these teeth for a feline fursuit head base. They were made to be printed with TPU filament. Print with supports. https://www.youtube.com/shorts/yhy0Zt3w8mk I use them in this fursuit head base:
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are not included. Having…
These teeth were originally made for a fursuit head (for a cartoon character that has only front teeth).
@crystumes on twitter, https://crystumes.weebly.com/ Big shout out to Crystumes for letting me distribute this head base. Most of my measurements came off of her original cast of the Legacy wolf head base she created and I couldn't have…
I usually do not print teeth for my costumes - I prefer to sculpt them by hand with Polymorph. Resize as needed. Category: Costume
This is what I use to hold a laser-cut mesh eye - to make fursuit eyes that fit the model of my 3d-printed fursuit eyelids. If you want to add a transparent half-dome with 6 cm diameter on the outside of the eye you have to rescale the…
Remix of FuzzyRaptor's Fursuit feet paws base with the parts merged together.
My second attempt at a kemono-style base, haven't test-printed it yet though. The halves as well as the eye is for the right side of the head, you will have to mirror each piece for the full base.
I wanted a more portable fursuit head dryer that I could take to cons. I came up with this two part head stand. It uses a standard 120mm fan and is designed to fold up into a resealable bag (including the fan). Print settings that I used:…
Fursuit eye blank for cats and other felines, with bowl-shaped sclera area.
This pacifier is inspired by the NUK Classic design. Just put everything together, add a bit of super glue to keep it secure! Put the ring in some hot water for a bit to snap it on without breaking it :) This is a fursuit/costume prop and…
Inspired by @74TOFU's fursuit shackle prop, I created this model from scratch and added some improvements. Cuff diameter is 72mm. Measurements were made specifically to be worn over my fursuit arm paws. Prints with 0.2mm layers. Supports…
Sculpted in nomad, my first 3d print to offer the world! Here is a simple but toony styled fursuit claw. Don't worry, it's not sharp! It has a base for easy gluing. Just cut a hole in the tip of the paw, slip the claw through, and glue…
EYEBLANKS FOR 'WREN KEMONO HEADBASE' These eyeblanks are designed to fit the 'wren kemono headbase' ( https://www.printables.com/model/1133941-kemono-fursuit-headbase ) I made these eye blanks to go with my suit built on the wren kemono…
This head base was made to build a Panda costume. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable.…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. I did not include the model for the ears - use a felt…
This head base was made to build a fox costume. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable.…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. I did not include the model for the ears - use a felt…
kemono fursuit base w/ complete set
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The head is scaled for costume size -…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are a separate model because…
This head base was made to build a cute cartoon dog costume. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw…
Hyena fursuit headbase. This file is provided as is, if you have any questions or concerns contact me. Updated license, you can now use it commercially
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The model is scaled for costume size…
This head base was made to build a cosplay costume of Legoshi from Beastars. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach…
This is a red panda head base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are not included.…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. The model is scaled for costume size - rescale it if…
Introduction: This is an octagonal style glasses frame designed for fursuit heads with lots of customizable options! Upadte (2024/9/18): Added a new version that has a curved nose bridge instead of a flat nose bridge. How to customize…
This object is licensed for PERSONAL USE ONLY . For commercial use contact me at instagram: @portallabs Materials: PETG / PCTG PP / PETG / PCTG for the flexures Very Important: Correct slicing orientations are specified in the…
Introduction Previously I've upload “one piece” style rings (see here and here ), this new “non-piercing” style rings aims to fit more types and shapes of fursuit heads. I've provided sizes ranging from 15mm to 110mm internal radius. If…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The model is scaled for costume size…
A supersized pacifier to keep the fluff silent! Not for a real mouth! It's a fun accessory~ Instructions: print all parts glue the "bolt" into the "button" glue the "bolt+button" into the "shield" glue the "nuk" onto the…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. I did not include the model for the ears and horns -…
A claw/fingernail for a fursuit glove. The part that goes around the finger is supposed to be inside the glove - you only need a slit at the top of the glove. Resize before printing and print it with flexible filament like TPU.
The ears are meant to be printed with flexible filaments - like TPU or Nylon. Do not print them with PLA - having rigid ears on a costume is not a good idea. These parts were made as a flexible base for movable fursuit ears. The holes in…
This is a remake of my fursuit head base version 21 (a new model, not a remix) - the lower jaw is new and the main part of the head was optimized for printing it in one piece. This is a head base that can be used to build a puppet-,…
This head base was made to build a cartoon bear puppet. The head base can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is…
Introduction: Every file in the system shares the same thread so each and every piece can be threaded together, feel free to experiment! If your fursuit head has pickable nose, you can use ArcThreeQuater , ArcHalf or a Bar in a length of…
Inspired by the "MAM Original" pacifier I created a fursuit pacifier. Just put everything together, add a bit of super glue to keep it secure! The clip just snaps onto the button. This is a fursuit/costume prop and not intended for real…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable. I did include the model for the ears, but I do not…
This head-base can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. The model is scaled for costume size - based on my measurements. I have a small head - you might have to scale it up if you…
This is a headbase I made back in 2022! It doesn't have hinges so you'll have to attach some yourself, and there may be other jankiness to it. Please contact me if you have any questions or concerns.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did not add ventilation holes as I expect most people will not cover the surface with fabric or felt. I got some inspiration for this…
This is a headbase I made back in 2022! It doesn't have hinges so you'll have to attach some yourself, and there may be other jankiness to it. Please contact me if you have any questions or concerns.
Made by myself. This file is provided as is. For any questions or concerns, contact me (inevitablegoose.com). The hinge is designed to have a loop of elastic tying the head and jaw together. The head is quite large, there is a version…
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. It is scaled for hand-puppet size and fits my hand perfectly. If you want to use it for a costume you should scale…
Introduction: This is a goggle frame designed for fursuit heads with lots of customizable options! How to customize using OpenSCAD: Download OpenSCAD at https://openscad.org/ . Open the .scad file (Top left corner, File→Open File). Turn…
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. I did not include the lower jaw because It's faster to make one with an aluminium-profile when to print it. I just…
I wasn't happy with the other options for 3D printable fursuit paw driers so I designed my own that has a good mix of durability, stability, and a compact size for transportation while disassembled. I also designed it to fit everything…
These are big and around 4 inches in size, so it might not work for smaller fursuit heads.
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did not add ventilation holes as I expect most people will not cover the surface with fabric or felt. I got some inspiration for the…
Sick of the jaw slipping away? I've modelled this chin stopper to avoid this One version with clip, one with the base and one with just the stoper Maybe you need to size it according your head jaw, but in any case, supports are not needed!
heres my own spin on fursuit glasses personally made for my character d:
These "follow me"-eyes are made for the fursuit-sized head-base version 15. They will not fit in the other heads. They are scaled for a 21.5cm wide head. The holes in the eyes are recessed. This creates an optical illusion for the viewers…
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. The model is scaled for costume size - rescale it if you need to. Category: Creatures
Fox fursuit headbase I modeled for a commission. This is meant to be printed in tpu as infill only. This base doesn't have a hinge and is meant to be glued onto a balaclava as the method for the moving jaw. When I printed this, it was a…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/dkzWdVPPuTD Use the four smaller holes for bands connected to a servo motor, to wag the tail. middle hole is for metal wire, to allow the tail to be semi…
The perfect way to label your luggage or Action Packer to make sure none of the normies make off with it. Tag dimensions are 4.75" x 1.75" x 0.25" (121mm x 45mm x 6mm) and it has a hole built in for a steel cable tie, plastic tag loop, or…
English Description: These are custom-made ears for a mask.The ears also have grooves, so they should be held without glue. I modeled them to fit the mask, but since I don't remember if I scaled the mask when I was modeling. you may need…
Hello everybody!!! This is a design in continuation of my open sourced Protogen head project!! I've been in the furry community for quite a while now... and the biggest hurdle in getting a suit or even a partial is the lack of skill, and…
Load up in your slicer, scale, print! please credit “ECG TECH or Corporate Memphis” if you sell.
Fursuits (and other costume heads) get really hot! Unfortunately, if you don't own a full fursuit (just a partial or mini-partial), there really aren't any easy hands-free options for cooling down that don't involve modifying your suit.…
Cartoon style tongue for costumes/masks/puppets/fursuits No support needed! There are two models: The first one will be printed orizontally The second is an empty model and will be printed vertically Reccomended filament: TPU (60c/50c or…
It is a minimal fursuit head-base, that can be attached to a balaclava. A simple base for a costume head with a movable lower jaw. Category: Costume
I was making Fursuit eyes for my Fursuit, and I decided to make the some over-engineered) And here they are For magnet parts you need 44pcs of 2x3x5mm magnets 10pcs M4 hex nuts 10pcs M4x8mm screws Attention! If you need magnetic mount,…
Autistic woke furry femboys kissing transgender lesbians
The perfect way to show off your fursuiter pride on your fridge. Magnet dimensions are 4.75" x 1.75" x 0.25" (121mm x 45mm x 6mm) and it has holes built into it for 6mm diameter x 3mm height magnets. Use superglue, 3d Gloop, or E6000 to…
Left and Right ear for fursuit makers/furries.
Fursuit head model for cosplays and/or fursuits. Please note, this is NOT made by me.
From turning red
MYNAMEISEDWINIMADETHEMIMICITWASDIFFICULTTOPUTTHEPIECESTOGETHOR
Im not even that good at 3d models
Kemono Fursuit Head Upgrade Parts This is a collection of custom parts I designed while building my Kemono-style fursuit head. They are intended to be used with the Kemono Fursuit Headbase by furns , which is linked as the original model…
![[TPU]Cartoon tongue for costume/puppet/fursuit](https://media.printables.com/media/prints/51a4abf7-504c-4332-a169-64616708209f/images/12752545_590ad085-7bcf-439f-922e-a3e0ff7719f8_02c7cff5-6e1a-474c-baa9-433476dd5bb4/tongue-foto.jpg)
