1 / 3
Fursuit Shackle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a shackle and chain link prop made to be worn over a fursuit hand paw.
- Rating
- 0 / 5
- Likes
- 71
- Downloads
- 336
- Makes
- 0
- Views
- 2,052
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Inspired by @74TOFU's fursuit shackle prop, I created this model from scratch and added some improvements.
Cuff diameter is 72mm. Measurements were made specifically to be worn over my fursuit arm paws.
Prints with 0.2mm layers. Supports needed. Print as many chain links as you wish. They can be connected through the wedged slot.
You will also need:
- 1x M4 x 50mm or longer bolt for the hinge, I use this https://www.amazon.com/uxcell-M4x70mm-Thread-Socket-Screw/dp/B01IY3LTPE
- ¼" diameter, 90mm long dowel to secure the shackle, https://www.amazon.com/dp/B093GDZ27Y
This is version 2 of the shackle model. I may add a version 3 with further improvements…stay tuned…