1 / 3
Fursuit Head Dryer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A foldable fursuit head dryer with a 120mm fan
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 429
- Makes
- 1
- Views
- 1,612
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Share Alike
I wanted a more portable fursuit head dryer that I could take to cons. I came up with this two part head stand. It uses a standard 120mm fan and is designed to fold up into a resealable bag (including the fan).
Print settings that I used:
- Polymaker Polylite ABS
- 0.4mm nozzle
- 0.20mm layer height
- 3 wall lines
- 5 top/bottom layers
- 30% infill
- support enabled everywhere for the top part
Notes:
- Both parts have built-in hinges and are designed to print in place
- Having support enabled is required for the top part
- I recommend using a fan with a fan grill to prevent fabric or fingers coming into contact with the fan blades
- (optional) You can add a sheet of paper/cardboard with the center cut out between the fan and feet to improve air flow. A pdf template is provided