Forgiving Nozzle Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.63 – €0.76 net (excluding VAT)
For file: Nozzle Wrench_0.4n_0.2mm_PETG_MK4S_37m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.70 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 37.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Nextruder nozzle wrench useful for nozzles that have some buildup on them.
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 1
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Update: The wrench now tapers, making it easier to use with a sock. Internal geometry adjusted for better results.
Over time we often get crud on our nozzles, which makes it very difficult to use most nozzle wrenches as they won't slip onto the nozzle. This frustrated me, even though I tried several wrenches - so I started from scratch, making one with a hole that is large enough to fit onto most nozzles even if they have some buildup on them, but still be an effective way to remove nozzles.
Printed pointing upright to give better dimensional accuracy of the hole.
Note that this is not for nozzles that need to be changed hot, only the nozzles for the Nextruder and similar nozzles that can be changed cold.