Dynafit Ski Touring Binding - Adapter for maintenance
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To secure the touring ski during maintenance - waxing skis and grinding edges
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Share Alike
To secure the touring ski during maintenance - waxing skis and grinding edges.
Simply fix the binding in the holes and attach “the monster” to the table. Either the version where you screw it on directly or the second version where the support is attached to the table with screw clamps.
the height from the table edge to the binding is 120mm
Printed in PETG with 40% infill and 5 Perimeters - so that it doesn't break when you press it hard.
Have fun → "Beim Lattln einfetten!"
//edit:
I made a Dynafit_merged_v3 - which is more suitable for printing PETG or ASA because it has grooves on the bottom and that reduces the pull. And therefore less prone to warping!