Covid 19 mask breather: Remix, full flat 3D print or laser cut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
... my Bowden setup struggled with the snap on buttons on the original design. => I redesigned it fully flat with…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
... my Bowden setup struggled with the snap on buttons on the original design.
=> I redesigned it fully flat with hooks.
Two sizes: for standard 17cm masks as well as 14cm "kid size" masks.
As always: use responsibly at your own risk!
Check on this for additional comfort - at least as long as you are wearing glasses along with your mask:
https://www.thingiverse.com/thing:4599585
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.24
Infill:
0%
Filament:
Das filament PETG Blue
Notes:
Geometry designed for following print settings:
Three "shell" outlines with 0.4mm nozzle.
First layer 0.28, second and third layer 0.24
... For minimal print times!
Category: Other