1 / 3
4-way Y Splitter with ECAS04
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 4-way Y splitter with 5x ECAS04 fittings for use with the 3MS MMU.
- Rating
- 4.333 / 5
- Likes
- 50
- Downloads
- 485
- Makes
- 7
- Views
- 1,772
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This is a simple 4-way Y splitter designed for use with the 3MS Modular Multimaterial System .
This splitter design uses 5x ECAS04 fittings and is intended to be printed at a 0.2mm layer height with PLA or ABS/ASA (PETG is too soft).
Assembly Instructions:
- Assemble 5x ECAS04 (the blue part and the silver/black part).
- Remove the black rubber from each ECAS04.
- Insert one ECAS04 onto the side with four holes
- Place the splitter with the fitting facing the table, and hammer on the opposite surface, taking note of the “hammer” zones (highlighted in blue on the right).
- Repeat for the remaining ECAS04 fittings.