Bycicle / MTB lamp mount - alternative seat post
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I mounted a bag to the porter of my bycicle - which completely covered the LED Backlight which is designed to be…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
I mounted a bag to the porter of my bycicle - which completely covered the LED Backlight which is designed to be mounted on the seat post.
This adapter creates an "alternative seat post" which is screwed to the back of the porter with two M5 screws.
The angle of this alternative post is 20°, which attaches the Backlight in parallel to the ground.
This can be printed upside down without support. I used a brim due to hight / bottom surface ratio - but would probably also work without brim.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
20
Filament:
None PLA Black
Notes:
I used a 3mm brim - would probably work without, just wanted to be sure...
Category: Sport & Outdoors