Multiboard Electric Screwdriver Holder and Bit Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Generic ball grip (vessel knockoff) electric screwdriver holder with 5x4 slot bit holder for multiboard system
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Generic ball grip (vessel knockoff) electric screwdriver holder with 5x4 slot bit holder for multiboard system. The bit slots are extra deep for the longer shanks. Hex is labelled 6 - 2.5, Torx is below 20 - 8, as that's what my set has. The rest are unlabelled as I am storing slotted and phillips and I didn't need to label those. There are 20 slots total, in 5 x 4 grid.
Connects with multipoint for the multiboard system, I recommend this https://www.printables.com/model/790060-anti-rotate-multiconnect as otherwise it will spin around if you use the normal round connector cleats. This connection type is stable but easily removable.
No supports needed, printed on A1 with normal settings (2-3 walls, 15% infill). I have increased tolerance of the bits from v1 first print so if anyone makes this please feedback on the fit.
If you like my designs, consider popping a tip on https://ko-fi.com/valentineinstruments - it helps out a lot!