Counting matching models…
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
Bottle holder for the Multiboard using the Multiconnect system. Various sizes includes but the model is online with Onshape and is parametric. Use the URL and change the variable ‘size’ to whatever value you like. The fillets may need…
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
This is a holder design specifically for this KVM model (not affiliate) that you can buy from Amazon. Multiconnect is used for the connecting interface and it align with openGrid's 28mm grid size.
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
Mount a powerstrip with the keyholes to multiconnect. Multiconnect cutout is open so that it can be flexible to mounting locations of the multiconnector. I put the printed part on to the powerstrip first then slide it onto the…
I needed a way to hold my "wiring closet" components (switches, modems, power strips, power adapters) to my MultiBoard wall with MultiConnect connectors. I originally made this Fusion model to be screwed in, but then I found…
The under-desk hanger for my 8bitdo Ultimate 2C controller (likely fitting others too), for Multiconnect connectors with openGrid spacing (28mm). Bottom curve from this stand . Multiconnect slot from the modeling files . Dongle slot from…
I’ve created a BETA openGrid MultiConnect Lock Snap_Looser / Remover to help loosen the threads on the MultiConnect system. This allows for easier installation and removal during assembly and disassembly. To Find BETA openGrid…
Holds M12 Tools via the battery slot to multiboard with the multiconnect system
A teabag dispenser that uses a multiconnect mount.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Holds M12 Tools via the battery slot to multiboard with the multiconnect system
This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
UPDATED! - I have added Reversible ones so the handle can now be to the left or right Keep your filament organized with this modular spool holder designed for OpenGrid and multiboard systems! Perfect for workshop organization and easy…
You need to print a multiconnect mount for connecting to the grid. Select Multiconnect for openGrid > BETA openGrid Multiconnect Lock Snap and openGrid Foldable Multiconnect for printing. Installation requires two grid cells , as the…
This is for attaching a HP 45W USB-C laptop charger to an openGrid board using multiconnect. Print one of each part, using the settings you used for the other components of your openGrid setup. This power adaptor is not very heavy. You…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. While the 2 part assembly allows using a folded screw that can be printed in a stronger orientation*, that isn't always necessary,…
This Multiconnect snap is a remix based on the openGrid lock snap from openGrid by David D . It was made by combining a multiconnect connector with the (beta) lock snap. In my testing, I found that the one of these lock snaps can hold…
Wall mount for the Harbor Freight Watchmakers Hammer. Includes 4 recessed holes for the interchangeable heads. Slot and recessed groove for the hammer to slide in and seat securely. Rear mount has 3 MultiConnect slots compatible with the…
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
A remix of jimmybish's HSW Ryobi Battery Holder. Tested on OpenGrid but it should find a home on all Multiconnect compatible wall systems. I was unaware there were existing solutions for OpenGrid at the time of design, but I don't like…
This is a test hook for strength testing of Multiconnect connectors, and the underlying wall mount systems that use them (such as openGrid, honeyCombWall, or Multiboard). I used the CNC Kitchen TEST HOOK as the basis for making the hook…
This is a flush multiconnect mounting point, for multiboard small thread, installable with the multitool ( https://thangs.com/designer/Multiboard/3d-model/Multitool-974180 ).
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
I needed a means of connecting an opengrid board to a door. I can do that now.
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. I made these simple snaps have the multiconnect connector as part of the snap. There are 2 different snaps, one using the standard…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…
This is a simple blank sign that you can customize using your slicer's text function. Thanks to multiconnect, it can be attached to a lot of different systems like Ikea Skadis, Multiboard, Opengrid, .. Just print your respective connector…
In general: Print one of each. Put Velcro through the channel and put it on the board. Fasten the power brick with Velcro. Velcro channels are 15mm wide and 1.5mm deep. That is 150/254 inch by 15/254 inch if you prefer fractions and…
Magsafe iPhone and Airpods Pro2 Dock - Mount for openGrid Multiconnect - Swivel Charging works for Airpods2+ Case in vertical position and even iPhone 13mini which has camera lenses near the magsafe magnet ring. It fits for 2nd gen…
Lets you mount your Pixel 1 phone on your Multiboard, or anything that has 2 Multiconnect connectors, 50mm apart. View/Copy on Onshape You will need 2 Multiconnect connectors, links: Here for the Multiboard version. Here for a wall…
This is using the multiconnect snap in dimensions to create a stud that will allow you to hang lasercut shelving. For the laser cut shelf simply make a couple of slots that are at least 16mm wide and 20mm tall. For an OpenGrid wall,…
This is a remix of the minimalistic stand for Apple Watch that will print as one piece. It is compatible with Opengrid / Multiconnect to add your watches to the wall grid. Mirror is slicer to align the watch face from left to right side.…
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
This is a build plate holder for MultiBuild that holds up to 5 3D printer build plates. Fits plates up to 1.3mm thick. Compatible with pretty much any brand of plate. You need 2 of the MultiConnect connectors.
An adapter to use Multiconnect accessories for Multiboard or OpenGrid on a Cheap Wireframe. Print as in the screenshot. More details here:
Disclaimer: I used @Swebra 's parametric Multiconnect Cutout Negative to make the back of the holder.
Universal mount for your game controller. Attach to multiboard using multiconnect, also download and print two multiconnect connector . Multipoint compatibility: If you want to use this model with multipoint you may use the multipoint to…
This improved Multiconnect Snap is easy to print, holds a firm grip on, and is easy to remove when you want to.
I loved these drawers, but I thought, What's the biggest I could make it and still fit on a 256x256x256 build plate? Turns out it is a 5x5 Gridfinity and 5 drawers high. Note the drawers are 5u Gridfinity bin tall. I've also included the…
Print this to quickly mount your Ryobi battery to your Multiboard. This works with any Multiboard to Multiconnect connection points. Find my favorite ones here .
Multiconnect is a generic system to hang things to your wall or any board (like Multiboard or Honeycomb). Those files here should only be used for modeling, allowing you to create any variation of multiconnect you want. This is version 2…
A big hook to be used with the multiconnect pieces on wall mounted systems such as multiboard. The hooks are mounted on two connectors to prevent rotation. Two hooks can be mounted side-by-side or spaced apart. The size of the hook was…
Since multiboard has released multipoint there are now two different, but very similar systems: Multiconnect and multipoint. As multiconnect was released several months earlier (beginning of 2024 compared to August) there are many models…
A caliper holder for Multiboard but with a multiconnect backing.
It's just a quick and dirty remix because my old mount broke down and I just found multiconnect which I throw at everything I design now. I just use the snaps from this collection:…
This is a basic holder for the Simplehuman Size Z composting bags. It make's use of David D's Multiconnect system which itself attaches to Multiboard. You'll need 2x screw-in multiconnects and this simply slides over. It's quite sturdy…
The adapter created by I_need_a_better_name is excellent but, it was missing a crucial part: it needed a tab to secure the bin in place to keep it from sliding off. So, I added one. Now the bins stay in place unless significantly bumped.…
Tool holder that grabs the tool from the battery slot. Designed to hold the drywall router and flashlight, should be compatible with more 20V Dewalt tools. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with no…
Modified GUZ_Prints Hex bit holder to use multiconnect to connect to my multiboard. It loses the feature of interconnecting multiple sections nicely, but I found the size to be more than sufficient for all my bits with just one. Printed…
Remix of ntressler7's Dewalt battery holder, replacing the screw mount by multiconnects. Printed on a Voron 2.4 in PLA. 0.2mm layer thickness on a 0.4mm nozzle with tree supports for the muticonnect snap pyramid
I remixed HandsOnKatie's smallest hook to carry small things like keychains and other stuff with small holes. This hook is 8mm wide (with 25mm wide multiconnect back). Additionally I removed the side overhangs to place hooks directly side…
Welcome to the exciting world of Wonderwall - the wall mounting solution with wonders and miracles. This is Wonderwall Multiconnect , the generic connector you can use to attach things to your Wonderwall - also being able to handle heavy…
I didn't like too much the way the original tool hanger attached to the multiboard so I decided to remix it using the multiconnect system It is really sturdy now and easier to move around the boards in my house.
Every multiboard needs to have some bins to put stuff in. … and sometimes you need to put a lid on it. I initially created these simple lids to store empty teabag packaging and filament purge in these bins . There are versions with a…
This is to mount a JBL Charge 5 (and possibly other JBLs) to your Multiboard wall. You need to print 2x Brackets & 4x Multiconnect Big Thread Connectors. It uses the Multiconnect system and requires the Big Thread Connector found here:…
Another Ryobi 18V battery holder for the Multiboard system. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model…
Another AEG / Ridgid 12V battery holder for the Multiboard system. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
I needed a way to mount MultiBoards to my door, and I couldn't find any models that worked for the size of door that I have, so I designed this to be fully parametric within Fusion 360, I will update this description later with more…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
I'm a Multiboard convert, both for general wall-based organization and for underdesk cable management using @HandsOnKatie_827995 's fantastic Underware system. I wanted to mount my MacBookPro's 96w power supply under the desk, but…
Simple Spool holder for Multiboard with Multiconnect Hold a single spool of 1Kg using a 3x3 space of the Multiboard. It was modeled based on the Elegoo Cardboard spools so hold chunky and skinnier ones. A small amount of support is needed…
Remixed the above and added multiconnect to it, two versions.
Multiboard holder for the Ryobi USB Lithium screwdriver and two extra bits. Works when the tool is in straight or pistol ‘mode’. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than…
Made a simple cylinder to hold my sharpies, uses the multiconnect that can be found here (uses 2x connectors) https://www.printables.com/model/1074671-multiconnect-generic-connector-for-multiboard-v2 Printed without supports with the base…
Thanks https://www.printables.com/@DanielRyan for a great design, this is a copy with modifications for multiconnect. Not sure how to upload multicolor prints to Printables, but step should contain both logo and stand. Spacing for…
Multiboard holder for the Ryobi USB Lithium batteries. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks…
Multiboard holder for the Ryobi USB Lithium battery charger. You will need 2 M4 8-10mm machine screws for the pre-made holdes. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than…
Multiboard holder for the Ryobi USB Lithium Inspection light. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model…
MultiConnect trays with radiused bottom corners to make grabbing small objects easier, couldn't find one like it already. Printed in Grass Green Voxelab PETG-CF, 0.2mm height, 3 walls, 5% gyroid. I love this filament btw.
Multiboard holder for the Ryobi USB Lithium Glue Pen and its stand. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The…
Want some extra strength when using multiconnect on your multiboard? Use the multiconnect rails to connect multiple connector heads using a rail. This rail will increase the area the parts are touching and by doing so increase the…
wall mount for BOBOVR battery charger. b2 charger version ( quest 2 / quest 3 / pico 4 ) for use on multiboard mounting solutions, using multiconnect attachment system- created using the generator provided in underware2.0. personally, I…
I wanted to mount LED lighting under my desk using Hands On Katie's excellent Underware system. I used a Vroom32 ESP32 Dev board for a WLED controller, using the excellent case created by Predy, but it needed some tweaks to make it…
Generic connectors to hang your bins/shelves or anything else to your GOEWS wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and allows for fast…
Generic connectors to hang your bins/shelves or anything else to your Skadis wall. The connector is pretty generic and allows you to attach anything you want. Why use this connector: The connector is universally usable and allows for fast…
MULTICONNECT SCREW for Elegant Screwiverse Insert
This is a simple 2,5" HDD and SSD holder for multiboard with multiconnect. Work with thickness 9,5mm & 7mm
Prints on the side even on A1 Mini, has built-in easily removable supports. Easily hang on MultiBoard using MultiConnect adaptors.
I use this mount for my nightstand, and when I decided to upgrade to a multiboard, I needed to add a multiconnect backing. It's not pretty in the slightest. I may make it look nicer in the future, or if somebody wants to make a better…
I needed to make the hubs a bit wider to fit standard rolls in the US. I modified the FreeCAD drawing available at https://www.printables.com/model/50308-kitchen-roll-holder This also uses Multiconnect -…
Remixed this Focusrite Scarlett 2i2 under desk mount so that it uses Multiconnect slots to mount instead of the screw holes. Printed with the same orientation as the original, and no supports needed. I printed this in PETG, which has…
This is to mount a Milwaukee Packout Magnetic Bin to a Multiboard using MultiConnect. Get the connectors here: https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard
This setup enables mounting a Sterling blade dispenser on a Multiboard wall by replacing the metal clip with a Multiconnect mount. This design allows for quick and easy removal of the dispenser when needed. To attach the Multiconnect…
Description A simple, stackable container for storing items for the multiboard system. It is attached to the multiboard with (at least) 3 Multiconnect attachment points and can be easily removed. The container can be divided into two…
I found the original project very useful but I wanted to use the multiconnect system to connect it to my multiboard I have made only smaller version, If need the larger version ask me Slicer settings and other info: PLA 0.4mm nozzle 0.2…
Based on the Item Holder from BlackjackDuck's Multiconnect Part Generator. Modeled to fit the Drop + THX AAA™ ONE Linear Amplifier, but cut out some holes for the rubber feet to make the mount thinner overall, and to act as a retention…
This will mount a Zoyi ZT-702S or Xeast XE-702S (same product just different branding) to Multiboard using Multiconnect. You will need to print the Multiconnect connectors here:…
To mount it, 2 to 4 Multiconnect screws are required. https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard
This model is a wall mount holder for the CT-Energy Battery Charger Model NC-02 for button batteries, designed for Multiboard and Multiconnect .
