Multiconnect Rails for Multiboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Want some extra strength when using multiconnect on your multiboard? Use the multiconnect rails to connect multiple connector heads using a rail. This rail will increase the area the parts are touching and by doing so increase the strength.
Howto use: To attach the rails in between your connector heads you need to remove at least one side from your board. Do so, slide the rail in between, then attach everything again.
Printing instructions: All models are provided in the orientation they should be printed. Use at least 3 perimeters and I suggest at least 20% infill. I'm using the grid infill pattern, but others might just be fine. Please don't print in “superfast” (/"SPEED") mode, use “STRUCTURAL” for Prusa printers for example.
Credits to Jonathan (KeepMaking) for creating multiboard.