Cover for horn on Royal Enfield motorcycle with emblem.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for horn/tooter/hooter on Royal Enfield motorcycle with emblem.
- Rating
- 3.5 / 5
- Likes
- 23
- Downloads
- 287
- Makes
- 1
- Views
- 860
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cover for horn/tooter/hooter on Royal Enfield motorcycle with emblem.
I printed in ASA but other materials may be used, just less durable.
Optional plastic securing screws ( x 3 ) may be printed and used although bolts or grub screws may alternatively be used to secure if you have them.
If you use the plastic bolts best put a little lubricant on them. I used some silicone but washing up liquid probably do the job.
You may have luck with the main cover without support material although best to use some as only minimal required. If you choose to print the plastic securing bolts these do require support material but only very little.
I made this model some time ago before I decided to share the design, no pictures as don't have access to the bike anymore.
I have some other Enfield models I could dig out if I notice any interest.
Have fun!