Counting matching models…
The rear fender on the HS2 braces rattled all the time. This brace was created to end the rattle.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
If the magnet and the plane get stuck or jam whilst turning the dial then its more than likely the small cogs inside have split, this separates the teeth enough to not rotate smoothly. Printed in PLA .10mm Detail 15% Fill (this can be any…
Diese Figur ist ca im Massstab 1:35 und ideal für Resin Druck
Motorcycle scrambler cookie cutter. The mold consists of 2 parts. The outer part is used for cutting and the inner part creates the outline of details and contours on the cake.
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Ducati Scrambler Turn Signal Adapter for non-original blinkers
This lid was printed with PLA, however, i recommend using PETg or ABS cause its going to bend up when sunlight hits on it. My friend wanted it to look exactly as the original part was so he sanded it up and then did it a paint job.…
This is a straight driving ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been…
This is a steerable ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been tested…
I picked up a nullbits Scramble while looking into mechanical keyboards and decided to build a case for it to have a macro pad added to my setup. It would be reasonable to just stick some adhesive feet to the bottom of the assembly and…
Replacement part for the original hoop from the "Screwball Scramble" toy made by Tomy. Print the STL file twice and glue two parts together. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1…
now you can print either the coin by itself or a stack of coins that resembles the stack you see in the game
This took wayyyyy too long. Please like and share with your friends who play dreamlight valley Great for gifts!!
Parts to launch the ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. 2015/2016 redesign: To make it easier to launch the…
Printed out of PETG CF. Needed Materials: 4x M5*45mm Screw 4x M5 Washer 4x M5*10*7 (heat nuts) 4x M4*16 4x M4 Washer 4x M4*4*6 (heat nuts)
Similar to BMW-Motorrad Part No.: 32718558526
Small rubiccube beads for shoelaces or hoodie strings.. Maybe backpack strings. It has 3 main orientation for the hole in it: Vertical Diagonal Corner to corner You can also find solved, and scrambled versions in the 3mf files! The…
The main dimensions are taken from the original parts. Only part 5 has been changed, but it can be cut manually if the original size is needed. Filling is 100%. Printed from PETG. It is important to print in the right direction - parts 5…
un carinissimo portachiavi per gli appassionati del marchio Ducati
This is a plug/cover for CVT hot air outlet hose during cleaning of Polaris Scrambler S / Sportsman S. Because of the direction and location of the original outlet in these models it is easy to flood the CVT mechanism and the belt. Just…
Print with black PETG with the z-seam at the bottom for best results.
lovely Ducati scrambler.... be careful with the side stand when removing the supports....
You need: 1 Printed Board 13 printed Piece1 13 m3x12 screws 24 printed Piece2 in different colors (e.g 6 x 4 or 8x3) Preferrably you print this with a soft plastic(e.g ABS or Nylon), but PLA will also do Category: Puzzles
Hirsch Scramble Pad Blank Cover Material - Prusament Galaxy Black PETG Design software - Plasticity Design units - Imperial Inches Use - Commercial / Industrial card readers/ scramble pad (Blank Cover) Both .4mm and .6mm nozzle size files…
Motorcycle Pillion Seat Bracket Replacement Overview: A redesigned bracket to replace the conventional pillion seat holder, addressing common breakage issues at the nose section. Installation Guide: Remove original bracket carefully - cut…
Lavero simple scrambler ducati
Triumph Scrambler 1200 High Beam Remote Control Button. Slightly longer than original. PETG.
Previous models people have “drilled” into the case to run wires wherever they may. That seems unfinished to me and I do not want a loop of wires hanging out the side or wrapping around. -Supports 100% of the time ONLY for the OLED…
Nullbits has a 6 switch macropad with options for encoder and OLED ( 128 x 32 ). The scramble PCB layout however locates the I2C ( for the OLED ) through-hole vias in a location that if populated directly (i.e mounted onto PCBA ) will…
POLARIS SCRAMBLER CHAIN GUIDE, BUILD IT FOR MY 2001 SCRAMBLER 500
Easy egg scrambler insert for wide mouth mason jars. Easily scrabble eggs without the mess. This insert fits standard 16 oz wide mouth Mason Jars and can simultaneously scramble up to 6 eggs per load. Simply crack desired number of eggs…
A US license plate holder for the Ducati Scrambler 800. This was made for a 2015 Scrambler Classic model, but I believe it will fit other models of the Scrambler 800 with the same rear license plate subframe/mounting points. Utilizes the…
Scramrod case without belt/molle clips and lanyard loop. Remixed for compactness
V outdoorové hře Geocaching se začínají objevovat keše (první vlaštovkou je keš GCBG22E autora Vosoni), které vyžadují dekódování postupových souřadnic novou metodou. Souřadnice lze samozřejmě dekódovat na papíře, mnohem zábavnější je…
An outboard heat shield for the right-hand exhaust on a 2019 Scrambler 1200 XC 2019-2021. It stands 12 mm off the OEM finned cover on the bolt that's already there, and the air gap is the whole thing - nothing on it touches anything hot.…
This is an experimental headlight guard designed specifically for the Royal Enfield Scram 411 with the original glass headlight . The purpose of this part is to add a lightweight barrier in front of the glass lens that may help reduce the…
Instruction Manual and Video Available Project Manual A Project Manual has been created that takes you step by step through the process of converting the Estes Green Eggs model rocket in to our tribute of the Scrambler rocket. The manual…
UPDATE: The earlier print was too wide, so you could feel a little obstructed when putting foot down at lights or a stop. This version is much thinner and the lid opening is across the length, making it far less of a faff and more secure.…
This is a rigid, magnetic tank bag specifically designed to fit the contours of the Triumph Scrambler 1200 tank (fits all Scrambler 1200 X, XC, and XE models). I also do leatherwork so mine has leather topper, internal leather and soft…
I wanted to raise my standard front mudguard on my 2016 NineT scrambler, this is the second version as the first didn't give enough support to the mudguard only the bracket and it wobbled, this one fits perfectly and fills the entire…
This is an adapter or spacer for the bar ends of the BSA Scrambler 650. I bought some 'universal' bar end mirrors only to find that they do not fit on the bike. Without this adapter/spacer the accessories would only tighten against the…
A replecment for Screwball Scramble Bridge i know it isnt to good but does the job 🫤
Plug to close the hole in the Scrambler 1200 XC swingarm. Helps keep dirt and grime out mostly. Print in the softest TPU possible, lowest infill possible.
Fills the hole under the seat on the right when the grab rail and the upper infill panel come off a 2019 Scrambler 1200 XC. Printing 0.20, 2 walls plus alternate extra wall, 15% infill, tree supports (only under the bushings), 12 mm brim,…
Replaces broken leaking cap. printed with solid infill. Must reuse internal seal from original cap.
Description This is a two-piece hidden AirTag holder designed specifically for the Royal Enfield Scram 411 . It is made to fit behind the rear side plastic panel, under the passenger seat, keeping the AirTag completely hidden from normal…
Replacement of: 5439661-070 KEEP IN MIND, that the model is quite big and you have to have the bed size bigger than Bambu X1/P1 or Prusa Mk3/Mk4/One printers. I recommend using Bambu H2D/H2S or H2C. Material: PETG / PC-PBT / Nylon, and…
A basic 3d model of the X-43 A experimental aircraft used by NASA to test scramjet technologies the model is full scale but is designed to be scaled down at about 1/10 to 1/20 scale and 3d-printed this includes a version of just the plane…
Replacement of: 5439661-070 KEEP IN MIND, that the model is quite big and you have to have the bed size bigger than Bambu X1/P1 or Prusa Mk3/Mk4/One printers. I recommend using Bambu H2D/H2S or H2C. Material: PETG / PC-PBT / Nylon, and…
