Side Panel Infill - Triumph Scrambler 1200 XC Motorbike, grab rail removed (RH)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gilled ASA panel that closes the hole left when the grab rail and infill come off. Bolts to two existing fixings.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fills the hole under the seat on the right when the grab rail and the upper infill panel come off a 2019 Scrambler 1200 XC.
Printing
0.20, 2 walls plus alternate extra wall, 15% infill, tree supports (only under the bushings), 12 mm brim, 270 nozzle, 110 bed on the textured plate, fan 0-15%. Elephant foot compensation 0.2 - the show face is the first layer and a 110 bed leaves it soft enough to bulge. 2h06, 51 g for the pair.
Turn on avoid-crossing-walls. If an edge lifts, the head catches it on a travel move; that's dislodged a head for me.
ASA rather than PETG, it's a sun-exposed body panel ( you need 100 degree centigradee confidence with this thing)
Warping at this size is thermal, not adhesion, so glue and brim tuning won't save it. What wrked first time: washed plate, one thin coat, 30 minutes of bed soak at 110 with the door shut, no draughts, cooled on the bed. No seam taping needed. (I did throw a blanket over but i reckon 45 isfine)
Hardware
M5x25 and M5x40 countersunk, two M5 washers, two M5 flanged nuts. M4x20 plus nyloc and a rubber cap for the foot. Two M3x8 self-tappers. Cement or acetone.
Disclaimers!
Triumph names and logos belong to Triumph Motorcycles Ltd. This project is an unofficial fan creation with no endorsement or affiliation.
I present these files as is and accept no responsibility for your use of them on your bike. It's cosmetic and carries nothing, so please don't hang luggage off it.